Single Piece Design Threaded Floating Ball Valves

Single Piece Design Threaded Floating Ball Valves

Design & Manufacturing ASME B16.34, ISO 17292
Testing Standard EN 12266 -l
Material A216 GR. WCB, A351 GR. CF8, CF8M, Duplex Steel, Etc.
Class 150#
Suitable Medium Water, Oil, Air & Some Corrosive Liquid
Threading End BSP, NPT, BSPT
Face to Face Manufacture Standerd
Construction Investment Casting Body Full Bore
Operation Leaver, (pneumatic on Request)
Certificate ISO 9001 : 2008

A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle.The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve’s status.

Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse. These qualities make them an excellent choice for shutoff and control applications, where they are often preferred to gates and globe valves, but they lack their fine control in throttling applications.

Dimensions (mm)

15mm 58 12.5 115 47
20mm 68 19 115 55
25mm 76 25 142 70
40mm 98 38 170 95
50mm 116 50 170 105



error: Content is protected !!