A216 GR. WCB, A351 GR. CF8, CF8M, Duplex Steel, Etc.
ASME B16.5 CL. 150# (300#, 600# & Above On Request.)
Water, Oil, Air & Some Corrosive Liquid
ASME B16.5(Table Flange On Request)
Face to Face
Lever, (Pneumatic on Request)
ISO 9001 : 2008
A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle.The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve’s status.
JP MAKE 2 piece design allows for the center part of the valve containing the ball, stem & seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packing’s, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a two piece valve is for it to be repairable.