Three Piece Design Threaded Floating Ball Valves

SPECIFICATION
Design & Manufacturing	ASME B16.34, ISO 17292
Testing Standard	EN 12266 -l BS 6755(Part -1)
Material	A216 GR. WCB, A351 GR. CF8, CF8M, Duplex Steel, Etc.
Class	150#
Suitable Medium	Water, Oil, Air & Some Corrosive Liquid
Threading End	BSP, NPT, BSPT
Face to Face	Manufacture Standerd
Construction	Investment Casting Body Full Bore
Operation	Leaver, (pneumatic on Request)
Certificate	ISO 9001 : 2008

A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle.The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve’s status.

JP MAKE 3 piece design allows for the center part of the valve containing the ball, stem & seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is for it to be repairable.